Principio de funcionamiento del transformador de secuencia cero
The basic principle of zero-sequence current protection is based on Kirchhoff's current law: the algebraic sum of the complex currents flowing into any node in the circuit is equal to zero. When the line and electrical equipment are normal, the vector sum of the currents of each phase is equal to zero. Therefore, the secondary winding of the zero-sequence current transformer has no signal output, and the actuator does not act. When the ground fault occurs, the vector sum of the currents of each phase is not zero, the fault current causes magnetic flux to be generated in the annular iron core of the zero-sequence current transformer, and the induced voltage on the secondary side of the zero-sequence current transformer causes the actuator to act, driving the The tripping device switches the power supply network to achieve the purpose of ground fault protection.

Abundant Fuses, la línea de productos cubre todas las áreas relevantes de vehículos de nueva energía (paquete, PDU, BDU, control eléctrico, motor, MSD, arnés de cableado de bajo voltaje), sistema de carga y módulo de carga, caja de conexiones fotovoltaica solar fotovoltaica, inversor fotovoltaico, UPS fuente de alimentación, fuente de alimentación de comunicación 5G, enchufe BS UK, panel de control de electrodomésticos, fuente de alimentación de accionamiento de iluminación, etc.

Si tiene alguna consulta sobre cotización o cooperación, no dude en enviarnos un correo electrónico a holly@delfuse.com
